Compact easy to use thermometer with large display.
Faster response time for ambient air temperatures.
- Air tip
- Field calibrate to ±2°F
-
Rugged and waterproof (IP63)
-
3.1mm stem for “Pete’s” plug
- Penetration tip
- Auto off
-
Magnetic clip perfect for air duct applications
- 3-year limited warranty
- With the unit “OFF” press and continue to hold the ON/ OFF button.
- The LCD will alternate between °F and °C. Release the ON/OFF button when desired measurement mode appears on the LCD
- Remove the protective sheath from the stem.
- Press the ON/OFF button.
- Insert stem into area or object to be tested. At least 1/2” of the stem must be inserted.
Warning: The stem is a sharp and pointed object which can be dangerous.
The Data Hold function is used by pressing the D-H button when taking a measurement. The measurement will flash on the LCD when Data Hold is in use. To return to normal function, press and release the D-H button a
second time.
Press the ON/OFF button to end operation, or the unit will automatically power off after 35 minutes.
To reverse the LCD to suit your viewing angle:
Insert a small coin into notch in curved area “B”, then gently pry portion “A” from “B”. Shielded wires will keep the two parts connected. Twist the area “A” 180° and snap back into area “B”.
Product Documentation
Click below to view or download product documentation PDFs:
Get more accurate readings by using the right tip for your thermometer:
- Penetration: Use for immersion and air; air response time will be slower than if using anactual air probe.
- Chisel: Need chisel tip for surface temperatures. Penetration and/or air tips will not givean accurate surface reading.
- Air: Samples air temperatures three times faster than penetration or contact tips.
- Contact: Measures three times faster than chisel tip.
| Model 317c Specifications | ||
|---|---|---|
| Temperature Range | -58°F to 300°F (-50°C to 150°C) | |
| Accuracy | +/-2°F (+/-1°C) | |
| Resolution | 0.1°F | |
| Sample Rate | 1 reading every 1.5 seconds | |
| Stem Length | 2.8" | |
| Tip Type | Air | |
| Water Resistant | N/A | |
| Water Proof | N/A | |
| °C / °F Selectable | Yes | |
| Data Hold | Yes | |
| Auto Off | Yes | |
| Battery Type | LR44 | |
Model 317c Applications
HVACR
• Ambient Air
• Calibrate Thermostats
• Vents
• Compressor Heads
• Registers
ELECTRICAL
• Motor Temperatures
• Transformer Temperatures
Frequently Asked Questions
How do I check calibration of my pocket thermometer?
Place thermometer in a solution of crushed ice and water, swirl the water around and temperature should read close to 32°F.
Does the whole stem need to be immersed to get an accurate reading?
The sensor is in the tip of the probe and needs to be 1/2 inch into whatever you are measuring.
What battery does my pocket thermometer use?
The LR44 button battery is used in TPI pocket digital thermometers.