skip to Main Content

Accepts widest range of accessories, most versatile lead type. All of the Modular Test Leads on this page are RoHS Compliant.

Small Fully Insulated Crocodile Clips.

Click for Data Sheet
Click for Data Sheet

 

 A034 Specifications
 Maximum Voltage  50V
 Maximum Amperage  N/A
 Agency Listing  N/A
 Category Rating  N/A
 Insulation Material  N/A
 Dimensions  Lead Length: N/A
 Prod Length: N/A
 Jaw Opening: 0.16” (4.0mm)
 Type  0.16” (4.0mm) male Banana Plug

Frequently Asked Questions

What are the differences between the various types of TPI test leads?

Push-on tip test leads

  • Limited adaptability. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More adaptability. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most adaptability. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

Which test lead type is right for me?

The type of test lead you need is dependent on the applications you encounter.

  • If your applications require a standard lead and occasionally an alligator clip then the push on series of leads would work.
  • If you require a more secure connection of the alligator clip or would like the ability to use modular lead accessories in the future then the screw-on tip is right for you.
  • If your applications are varying and require several types of leads then modular leads are the correct choice.
  • If you have applications that require the utmost in safety then fused leads are the best choice.

What is the advantage to using modular test leads?

Modular test leads offer the most versatility of any lead set. Various types of lead tips can be used for different applications. A modular lead can be changed from a standard prod with handle to an insulation piercing probe, to an alligator clip lead just by changing the type of lead tip.

Can I use modular lead accessories with my screw-on tip test leads?

Yes, by using the A052 modular adapters. Screw the A052’s onto the tips of your test leads makes them modular.

What are important specifications when considering test leads?

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings.

Important Test Lead Criteria:

Lead Construction

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings

Lead Types

Screw-on tip test leads

  • Limited versatility. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More versatility. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most versatility. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

Small Fully Insulated Crocodile Clips.

Click for Data Sheet

Where to Buy TPI Products

 A034B Specifications
 Maximum Voltage  50V
 Maximum Amperage  N/A
 Agency Listing  N/A
 Category Rating  N/A
 Insulation Material  N/A
 Dimensions  Lead Length: N/A
 Prod Length: N/A
 Jaw Opening: 0.16” (4.0mm)
 Type  0.16” (4.0mm) male Banana Plug

Frequently Asked Questions

What are the differences between the various types of TPI test leads?

Push-on tip test leads

  • Limited adaptability. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More adaptability. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most adaptability. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

Which test lead type is right for me?

The type of test lead you need is dependent on the applications you encounter.

  • If your applications require a standard lead and occasionally an alligator clip then the push on series of leads would work.
  • If you require a more secure connection of the alligator clip or would like the ability to use modular lead accessories in the future then the screw-on tip is right for you.
  • If your applications are varying and require several types of leads then modular leads are the correct choice.
  • If you have applications that require the utmost in safety then fused leads are the best choice.

What is the advantage to using modular test leads?

Modular test leads offer the most versatility of any lead set. Various types of lead tips can be used for different applications. A modular lead can be changed from a standard prod with handle to an insulation piercing probe, to an alligator clip lead just by changing the type of lead tip.

Can I use modular lead accessories with my screw-on tip test leads?

Yes, by using the A052 modular adapters. Screw the A052’s onto the tips of your test leads makes them modular.

What are important specifications when considering test leads?

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings.

Important Test Lead Criteria:

Lead Construction

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings

Lead Types

Screw-on tip test leads

  • Limited versatility. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More versatility. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most versatility. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

Termination GS 38 Compliant. Widely used and accepted throughout the Industry.

Click for Data Sheet

Where to Buy TPI Products

 A036 Specifications
 Maximum Voltage  1000V
 Maximum Amperage  N/A
 Agency Listing  cULus 61010; IEC 61010
 Category Rating  CAT III 1000V
 Insulation Material  N/A
 Dimensions  Lead Length: N/A
 Prod Length: 0.12” (3.0mm)
 Jaw Opening: N/A
 Type  0.16” (4.0mm) male Banana Plug

Frequently Asked Questions

What are the differences between the various types of TPI test leads?

Push-on tip test leads

  • Limited adaptability. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More adaptability. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most adaptability. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

Which test lead type is right for me?

The type of test lead you need is dependent on the applications you encounter.

  • If your applications require a standard lead and occasionally an alligator clip then the push on series of leads would work.
  • If you require a more secure connection of the alligator clip or would like the ability to use modular lead accessories in the future then the screw-on tip is right for you.
  • If your applications are varying and require several types of leads then modular leads are the correct choice.
  • If you have applications that require the utmost in safety then fused leads are the best choice.

What is the advantage to using modular test leads?

Modular test leads offer the most versatility of any lead set. Various types of lead tips can be used for different applications. A modular lead can be changed from a standard prod with handle to an insulation piercing probe, to an alligator clip lead just by changing the type of lead tip.

Can I use modular lead accessories with my screw-on tip test leads?

Yes, by using the A052 modular adapters. Screw the A052’s onto the tips of your test leads makes them modular.

What are important specifications when considering test leads?

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings.

Important Test Lead Criteria:

Lead Construction

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings

Lead Types

Screw-on tip test leads

  • Limited versatility. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More versatility. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most versatility. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

Modular Standard Prod Set.

Click for Data Sheet
Click for Data Sheet

Where to Buy TPI Products

 A037 Specifications
 Maximum Voltage  1000V
 Maximum Amperage  N/A
 Agency Listing  cULus 61010; IEC 61010
 Category Rating  CAT III 1000V
 Insulation Material  N/A
 Dimensions  Lead Length: N/A
 Prod Length: 0.08” (2.0mm)
 Jaw Opening: N/A
 Type  0.16” (4.0mm) male Banana Plug

Frequently Asked Questions

What are the differences between the various types of TPI test leads?

Push-on tip test leads

  • Limited adaptability. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More adaptability. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most adaptability. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

Which test lead type is right for me?

The type of test lead you need is dependent on the applications you encounter.

  • If your applications require a standard lead and occasionally an alligator clip then the push on series of leads would work.
  • If you require a more secure connection of the alligator clip or would like the ability to use modular lead accessories in the future then the screw-on tip is right for you.
  • If your applications are varying and require several types of leads then modular leads are the correct choice.
  • If you have applications that require the utmost in safety then fused leads are the best choice.

What is the advantage to using modular test leads?

Modular test leads offer the most versatility of any lead set. Various types of lead tips can be used for different applications. A modular lead can be changed from a standard prod with handle to an insulation piercing probe, to an alligator clip lead just by changing the type of lead tip.

Can I use modular lead accessories with my screw-on tip test leads?

Yes, by using the A052 modular adapters. Screw the A052’s onto the tips of your test leads makes them modular.

What are important specifications when considering test leads?

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings.

Important Test Lead Criteria:

Lead Construction

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings

Lead Types

Screw-on tip test leads

  • Limited versatility. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More versatility. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most versatility. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

Hook Plunger Clip (Standard Socket rear).

Click for Data Sheet
Click for Data Sheet

Where to Buy TPI Products

 A038 Specifications
 Maximum Voltage  1000V
 Maximum Amperage  N/A
 Agency Listing  cULus 61010; IEC 61010
 Category Rating  CAT III 1000V
 Insulation Material  N/A
 Dimensions  Lead Length: N/A
 Prod Length: 0.4” (10.0mm)
 Jaw Opening: N/A
 Type  0.16” (4.0mm) male Banana Plug

Frequently Asked Questions

What are the differences between the various types of TPI test leads?

Push-on tip test leads

  • Limited adaptability. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More adaptability. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most adaptability. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

Which test lead type is right for me?

The type of test lead you need is dependent on the applications you encounter.

  • If your applications require a standard lead and occasionally an alligator clip then the push on series of leads would work.
  • If you require a more secure connection of the alligator clip or would like the ability to use modular lead accessories in the future then the screw-on tip is right for you.
  • If your applications are varying and require several types of leads then modular leads are the correct choice.
  • If you have applications that require the utmost in safety then fused leads are the best choice.

What is the advantage to using modular test leads?

Modular test leads offer the most versatility of any lead set. Various types of lead tips can be used for different applications. A modular lead can be changed from a standard prod with handle to an insulation piercing probe, to an alligator clip lead just by changing the type of lead tip.

Can I use modular lead accessories with my screw-on tip test leads?

Yes, by using the A052 modular adapters. Screw the A052’s onto the tips of your test leads makes them modular.

What are important specifications when considering test leads?

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings.

Important Test Lead Criteria:

Lead Construction

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings

Lead Types

Screw-on tip test leads

  • Limited versatility. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More versatility. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most versatility. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

Spade Terminal.

Click for Data Sheet
Click for Data Sheet

Where to Buy TPI Products

 A039 Specifications
 Maximum Voltage  N/A
 Maximum Amperage  N/A
 Agency Listing  N/A
 Category Rating  N/A
 Insulation Material  N/A
 Dimensions  Lead Length: N/A
 Prod Length: N/A
 Jaw Opening: N/A
 Type  0.16” (4.0mm) male Banana Plug

Frequently Asked Questions

What are the differences between the various types of TPI test leads?

Push-on tip test leads

  • Limited adaptability. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More adaptability. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most adaptability. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

Which test lead type is right for me?

The type of test lead you need is dependent on the applications you encounter.

  • If your applications require a standard lead and occasionally an alligator clip then the push on series of leads would work.
  • If you require a more secure connection of the alligator clip or would like the ability to use modular lead accessories in the future then the screw-on tip is right for you.
  • If your applications are varying and require several types of leads then modular leads are the correct choice.
  • If you have applications that require the utmost in safety then fused leads are the best choice.

What is the advantage to using modular test leads?

Modular test leads offer the most versatility of any lead set. Various types of lead tips can be used for different applications. A modular lead can be changed from a standard prod with handle to an insulation piercing probe, to an alligator clip lead just by changing the type of lead tip.

Can I use modular lead accessories with my screw-on tip test leads?

Yes, by using the A052 modular adapters. Screw the A052’s onto the tips of your test leads makes them modular.

What are important specifications when considering test leads?

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings.

Important Test Lead Criteria:

Lead Construction

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings

Lead Types

Screw-on tip test leads

  • Limited versatility. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More versatility. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most versatility. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

Probe Tip (Sharp Steel Point With standard socket).

Click for Data Sheet
Click for Data Sheet

Where to Buy TPI Products

 A054 Specifications
 Maximum Voltage  1000V
 Maximum Amperage  10A
 Agency Listing  cULus 61010; IEC 61010
 Category Rating  CAT III 1000V
 Insulation Material  N/A
 Dimensions  Lead Length: N/A
 Prod Length: 0.75” (19.00mm) / 0.08” (2.0mm)
 Jaw Opening: N/A
 Type  0.16” (4.0mm) male Banana Plug

Frequently Asked Questions

What are the differences between the various types of TPI test leads?

Push-on tip test leads

  • Limited adaptability. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More adaptability. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most adaptability. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

Which test lead type is right for me?

The type of test lead you need is dependent on the applications you encounter.

  • If your applications require a standard lead and occasionally an alligator clip then the push on series of leads would work.
  • If you require a more secure connection of the alligator clip or would like the ability to use modular lead accessories in the future then the screw-on tip is right for you.
  • If your applications are varying and require several types of leads then modular leads are the correct choice.
  • If you have applications that require the utmost in safety then fused leads are the best choice.

What is the advantage to using modular test leads?

Modular test leads offer the most versatility of any lead set. Various types of lead tips can be used for different applications. A modular lead can be changed from a standard prod with handle to an insulation piercing probe, to an alligator clip lead just by changing the type of lead tip.

Can I use modular lead accessories with my screw-on tip test leads?

Yes, by using the A052 modular adapters. Screw the A052’s onto the tips of your test leads makes them modular.

What are important specifications when considering test leads?

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings.

Important Test Lead Criteria:

Lead Construction

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings

Lead Types

Screw-on tip test leads

  • Limited versatility. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More versatility. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most versatility. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

Pair Back Probing Probes Part. (incorporate a spring steel prod).

Click for Data Sheet
Click for Data Sheet

Where to Buy TPI Products

 A057 Specifications
 Maximum Voltage  N/A
 Maximum Amperage  N/A
 Agency Listing  N/A
 Category Rating  N/A
 Insulation Material  N/A
 Dimensions  Lead Length: N/A
 Prod Length: 0.71” (18.8mm) / 0.04” (1.0mm)
 Jaw Opening: N/A
 Type  0.16” (4.0mm) male Banana Plug

Frequently Asked Questions

What are the differences between the various types of TPI test leads?

Push-on tip test leads

  • Limited adaptability. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More adaptability. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most adaptability. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

Which test lead type is right for me?

The type of test lead you need is dependent on the applications you encounter.

  • If your applications require a standard lead and occasionally an alligator clip then the push on series of leads would work.
  • If you require a more secure connection of the alligator clip or would like the ability to use modular lead accessories in the future then the screw-on tip is right for you.
  • If your applications are varying and require several types of leads then modular leads are the correct choice.
  • If you have applications that require the utmost in safety then fused leads are the best choice.

What is the advantage to using modular test leads?

Modular test leads offer the most versatility of any lead set. Various types of lead tips can be used for different applications. A modular lead can be changed from a standard prod with handle to an insulation piercing probe, to an alligator clip lead just by changing the type of lead tip.

Can I use modular lead accessories with my screw-on tip test leads?

Yes, by using the A052 modular adapters. Screw the A052’s onto the tips of your test leads makes them modular.

What are important specifications when considering test leads?

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings.

Important Test Lead Criteria:

Lead Construction

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings

Lead Types

Screw-on tip test leads

  • Limited versatility. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More versatility. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most versatility. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

TLK3 Test Lead Kit Description Video

Flanged Fully Insulated Crocodile Clip. (Large Flanged Alligator Clip).

Click for Data Sheet
Click for Data Sheet

Where to Buy TPI Products

 A058 Specifications
 Maximum Voltage  1000V
 Maximum Amperage  20mA
 Agency Listing  cULus 61010; IEC 61010
 Category Rating  CAT III 600 V; CAT II 1000V
 Insulation Material  N/A
 Dimensions  Lead Length: N/A
 Prod Length: N/A
 Jaw Opening: 1.02” (26.00mm)
 Type  0.16” (4.0mm) male Banana Plug

Frequently Asked Questions

What are the differences between the various types of TPI test leads?

Push-on tip test leads

  • Limited adaptability. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More adaptability. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most adaptability. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

Which test lead type is right for me?

The type of test lead you need is dependent on the applications you encounter.

  • If your applications require a standard lead and occasionally an alligator clip then the push on series of leads would work.
  • If you require a more secure connection of the alligator clip or would like the ability to use modular lead accessories in the future then the screw-on tip is right for you.
  • If your applications are varying and require several types of leads then modular leads are the correct choice.
  • If you have applications that require the utmost in safety then fused leads are the best choice.

What is the advantage to using modular test leads?

Modular test leads offer the most versatility of any lead set. Various types of lead tips can be used for different applications. A modular lead can be changed from a standard prod with handle to an insulation piercing probe, to an alligator clip lead just by changing the type of lead tip.

Can I use modular lead accessories with my screw-on tip test leads?

Yes, by using the A052 modular adapters. Screw the A052’s onto the tips of your test leads makes them modular.

What are important specifications when considering test leads?

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings.

Important Test Lead Criteria:

Lead Construction

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings

Lead Types

Screw-on tip test leads

  • Limited versatility. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More versatility. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most versatility. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

Probe Tip (Sharp Steel Point With standard socket).

Click for Data Sheet
Click for Data Sheet

Where to Buy TPI Products

 A059 Specifications
 Maximum Voltage  60V
 Maximum Amperage  DC 5mA
 Agency Listing  N/A
 Category Rating  N/A
 Insulation Material  N/A
 Dimensions  Lead Length: N/A
 Prod Length: N/A
 Jaw Opening: N/A
 Type  0.16” (4.0mm) male Banana Plug

Frequently Asked Questions

What are the differences between the various types of TPI test leads?

Push-on tip test leads

  • Limited adaptability. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More adaptability. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most adaptability. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

Which test lead type is right for me?

The type of test lead you need is dependent on the applications you encounter.

  • If your applications require a standard lead and occasionally an alligator clip then the push on series of leads would work.
  • If you require a more secure connection of the alligator clip or would like the ability to use modular lead accessories in the future then the screw-on tip is right for you.
  • If your applications are varying and require several types of leads then modular leads are the correct choice.
  • If you have applications that require the utmost in safety then fused leads are the best choice.

What is the advantage to using modular test leads?

Modular test leads offer the most versatility of any lead set. Various types of lead tips can be used for different applications. A modular lead can be changed from a standard prod with handle to an insulation piercing probe, to an alligator clip lead just by changing the type of lead tip.

Can I use modular lead accessories with my screw-on tip test leads?

Yes, by using the A052 modular adapters. Screw the A052’s onto the tips of your test leads makes them modular.

What are important specifications when considering test leads?

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings.

Important Test Lead Criteria:

Lead Construction

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings

Lead Types

Screw-on tip test leads

  • Limited versatility. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More versatility. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most versatility. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

1000V Fully Insulated Crocodile Clip.

Click for Data Sheet
Click for Data Sheet

Where to Buy TPI Products

 A066 Specifications
 Maximum Voltage  1000V
 Maximum Amperage  16mA
 Agency Listing  cULus 61010; IEC 61010
 Category Rating  CAT III 1000V
 Insulation Material  N/A
 Dimensions  Lead Length: N/A
 Prod Length: N/A
 Jaw Opening: 0.79” (20.00mm)
 Type  0.16” (4.0mm) male Banana Plug

Frequently Asked Questions

What are the differences between the various types of TPI test leads?

Push-on tip test leads

  • Limited adaptability. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More adaptability. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most adaptability. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

Which test lead type is right for me?

The type of test lead you need is dependent on the applications you encounter.

  • If your applications require a standard lead and occasionally an alligator clip then the push on series of leads would work.
  • If you require a more secure connection of the alligator clip or would like the ability to use modular lead accessories in the future then the screw-on tip is right for you.
  • If your applications are varying and require several types of leads then modular leads are the correct choice.
  • If you have applications that require the utmost in safety then fused leads are the best choice.

What is the advantage to using modular test leads?

Modular test leads offer the most versatility of any lead set. Various types of lead tips can be used for different applications. A modular lead can be changed from a standard prod with handle to an insulation piercing probe, to an alligator clip lead just by changing the type of lead tip.

Can I use modular lead accessories with my screw-on tip test leads?

Yes, by using the A052 modular adapters. Screw the A052’s onto the tips of your test leads makes them modular.

What are important specifications when considering test leads?

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings.

Important Test Lead Criteria:

Lead Construction

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings

Lead Types

Screw-on tip test leads

  • Limited versatility. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More versatility. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most versatility. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

Modular Grabber Clips. (Alligator plunger clamp).

Click for Data Sheet
Click for Data Sheet

Where to Buy TPI Products

 A067 Specifications
 Maximum Voltage  1000V
 Maximum Amperage  10A
 Agency Listing  cULus 61010; IEC 61010
 Category Rating  CAT III 1000V
 Insulation Material  N/A
 Dimensions  Lead Length: N/A
 Prod Length: N/A
 Jaw Opening: 0.59” (15.00mm)
 Type  0.16” (4.0mm) male Banana Plug

Frequently Asked Questions

What are the differences between the various types of TPI test leads?

Push-on tip test leads

  • Limited adaptability. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More adaptability. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most adaptability. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

Which test lead type is right for me?

The type of test lead you need is dependent on the applications you encounter.

  • If your applications require a standard lead and occasionally an alligator clip then the push on series of leads would work.
  • If you require a more secure connection of the alligator clip or would like the ability to use modular lead accessories in the future then the screw-on tip is right for you.
  • If your applications are varying and require several types of leads then modular leads are the correct choice.
  • If you have applications that require the utmost in safety then fused leads are the best choice.

What is the advantage to using modular test leads?

Modular test leads offer the most versatility of any lead set. Various types of lead tips can be used for different applications. A modular lead can be changed from a standard prod with handle to an insulation piercing probe, to an alligator clip lead just by changing the type of lead tip.

Can I use modular lead accessories with my screw-on tip test leads?

Yes, by using the A052 modular adapters. Screw the A052’s onto the tips of your test leads makes them modular.

What are important specifications when considering test leads?

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings.

Important Test Lead Criteria:

Lead Construction

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings

Lead Types

Screw-on tip test leads

  • Limited versatility. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More versatility. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most versatility. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

Safety Crocodile Clip.

Click for Data Sheet
Click for Data Sheet

Where to Buy TPI Products

 A068 Specifications
 Maximum Voltage  1000V
 Maximum Amperage  10A
 Agency Listing  cULus 61010; IEC 61010
 Category Rating  CAT II 1000 V
 Insulation Material  N/A
 Dimensions  Lead Length: N/A
 Prod Length: N/A
 Jaw Opening: 0.59” (15.00mm)
 Type  0.16” (4.0mm) male Banana Plug

Frequently Asked Questions

What are the differences between the various types of TPI test leads?

Push-on tip test leads

  • Limited adaptability. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More adaptability. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most adaptability. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

Which test lead type is right for me?

The type of test lead you need is dependent on the applications you encounter.

  • If your applications require a standard lead and occasionally an alligator clip then the push on series of leads would work.
  • If you require a more secure connection of the alligator clip or would like the ability to use modular lead accessories in the future then the screw-on tip is right for you.
  • If your applications are varying and require several types of leads then modular leads are the correct choice.
  • If you have applications that require the utmost in safety then fused leads are the best choice.

What is the advantage to using modular test leads?

Modular test leads offer the most versatility of any lead set. Various types of lead tips can be used for different applications. A modular lead can be changed from a standard prod with handle to an insulation piercing probe, to an alligator clip lead just by changing the type of lead tip.

Can I use modular lead accessories with my screw-on tip test leads?

Yes, by using the A052 modular adapters. Screw the A052’s onto the tips of your test leads makes them modular.

What are important specifications when considering test leads?

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings.

Important Test Lead Criteria:

Lead Construction

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings

Lead Types

Screw-on tip test leads

  • Limited versatility. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More versatility. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most versatility. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

Plunger Clip.

Click for Data Sheet
Click for Data Sheet

Where to Buy TPI Products

 A069 Specifications
 Maximum Voltage  1000V
 Maximum Amperage  5mA
 Agency Listing  cULus 61010; IEC 61010
 Category Rating  CAT III 1000 V; CAT iV 600 V
 Insulation Material  N/A
 Dimensions  Lead Length: N/A
 Prod Length: 0.3” (7.50mm) / 0.3” (0.8mm) diameter
 Jaw Opening: 0.255” (6.50mm)
 Type  0.16” (4.0mm) male Banana Plug

Frequently Asked Questions

What are the differences between the various types of TPI test leads?

Push-on tip test leads

  • Limited adaptability. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More adaptability. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most adaptability. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

Which test lead type is right for me?

The type of test lead you need is dependent on the applications you encounter.

  • If your applications require a standard lead and occasionally an alligator clip then the push on series of leads would work.
  • If you require a more secure connection of the alligator clip or would like the ability to use modular lead accessories in the future then the screw-on tip is right for you.
  • If your applications are varying and require several types of leads then modular leads are the correct choice.
  • If you have applications that require the utmost in safety then fused leads are the best choice.

What is the advantage to using modular test leads?

Modular test leads offer the most versatility of any lead set. Various types of lead tips can be used for different applications. A modular lead can be changed from a standard prod with handle to an insulation piercing probe, to an alligator clip lead just by changing the type of lead tip.

Can I use modular lead accessories with my screw-on tip test leads?

Yes, by using the A052 modular adapters. Screw the A052’s onto the tips of your test leads makes them modular.

What are important specifications when considering test leads?

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings.

Important Test Lead Criteria:

Lead Construction

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings

Lead Types

Screw-on tip test leads

  • Limited versatility. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More versatility. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most versatility. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

Fixed Shroud to Fixed Shroud.

Click for Data Sheet
Click for Data Sheet

Where to Buy TPI Products

 A079 Specifications
 Maximum Voltage  1000V
 Maximum Amperage  10A
 Agency Listing  cULus 61010; IEC 61010
 Category Rating  CAT III 1000V
 Insulation Material  Silicone
 Dimensions  Lead Length: 3.9 feet (1.2 Meter)
 Prod Length: N/A
 Jaw Opening: N/A
 Type  0.16” (4.0mm) Shroud plug & 0.16” (4.0mm) Shroud plug

Frequently Asked Questions

What are the differences between the various types of TPI test leads?

Push-on tip test leads

  • Limited adaptability. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More adaptability. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most adaptability. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

Which test lead type is right for me?

The type of test lead you need is dependent on the applications you encounter.

  • If your applications require a standard lead and occasionally an alligator clip then the push on series of leads would work.
  • If you require a more secure connection of the alligator clip or would like the ability to use modular lead accessories in the future then the screw-on tip is right for you.
  • If your applications are varying and require several types of leads then modular leads are the correct choice.
  • If you have applications that require the utmost in safety then fused leads are the best choice.

What is the advantage to using modular test leads?

Modular test leads offer the most versatility of any lead set. Various types of lead tips can be used for different applications. A modular lead can be changed from a standard prod with handle to an insulation piercing probe, to an alligator clip lead just by changing the type of lead tip.

Can I use modular lead accessories with my screw-on tip test leads?

Yes, by using the A052 modular adapters. Screw the A052’s onto the tips of your test leads makes them modular.

What are important specifications when considering test leads?

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings.

Important Test Lead Criteria:

Lead Construction

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings

Lead Types

Screw-on tip test leads

  • Limited versatility. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More versatility. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most versatility. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

90° Fixed Shroud to Shutter Plug.

Click for Data Sheet
Click for Data Sheet

Where to Buy TPI Products

 A081 Specifications
 Maximum Voltage  1000V
 Maximum Amperage  10A
 Agency Listing  cULus 61010; IEC 61010
 Category Rating  CAT III 1000V
 Insulation Material  Silicone
 Dimensions  Lead Length: 3.9 feet (1.2 Meter)
 Prod Length: N/A
 Jaw Opening: N/A
 Type  0.16” (4.0mm) male banana plug

Frequently Asked Questions

What are the differences between the various types of TPI test leads?

Push-on tip test leads

  • Limited adaptability. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More adaptability. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most adaptability. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

Which test lead type is right for me?

The type of test lead you need is dependent on the applications you encounter.

  • If your applications require a standard lead and occasionally an alligator clip then the push on series of leads would work.
  • If you require a more secure connection of the alligator clip or would like the ability to use modular lead accessories in the future then the screw-on tip is right for you.
  • If your applications are varying and require several types of leads then modular leads are the correct choice.
  • If you have applications that require the utmost in safety then fused leads are the best choice.

What is the advantage to using modular test leads?

Modular test leads offer the most versatility of any lead set. Various types of lead tips can be used for different applications. A modular lead can be changed from a standard prod with handle to an insulation piercing probe, to an alligator clip lead just by changing the type of lead tip.

Can I use modular lead accessories with my screw-on tip test leads?

Yes, by using the A052 modular adapters. Screw the A052’s onto the tips of your test leads makes them modular.

What are important specifications when considering test leads?

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings.

Important Test Lead Criteria:

Lead Construction

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings

Lead Types

Screw-on tip test leads

  • Limited versatility. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More versatility. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most versatility. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

90° Fixed Shroud to Fixed Plug.

Click for Data Sheet

Where to Buy TPI Products

 A082 Specifications
 Maximum Voltage  1000V
 Maximum Amperage  10A
 Agency Listing  cULus 61010; IEC 61010
 Category Rating  CAT III 1000V
 Insulation Material  Silicone
 Dimensions  Lead Length: 3.9 feet (1.2 Meter)
 Prod Length: N/A
 Jaw Opening: N/A
 Type  0.16” (4.0mm) male banana plug

Frequently Asked Questions

What are the differences between the various types of TPI test leads?

Push-on tip test leads

  • Limited adaptability. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More adaptability. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most adaptability. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.

Which test lead type is right for me?

The type of test lead you need is dependent on the applications you encounter.

  • If your applications require a standard lead and occasionally an alligator clip then the push on series of leads would work.
  • If you require a more secure connection of the alligator clip or would like the ability to use modular lead accessories in the future then the screw-on tip is right for you.
  • If your applications are varying and require several types of leads then modular leads are the correct choice.
  • If you have applications that require the utmost in safety then fused leads are the best choice.

What is the advantage to using modular test leads?

Modular test leads offer the most versatility of any lead set. Various types of lead tips can be used for different applications. A modular lead can be changed from a standard prod with handle to an insulation piercing probe, to an alligator clip lead just by changing the type of lead tip.

Can I use modular lead accessories with my screw-on tip test leads?

Yes, by using the A052 modular adapters. Screw the A052’s onto the tips of your test leads makes them modular.

What are important specifications when considering test leads?

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings.

Important Test Lead Criteria:

Lead Construction

Strands of wire

  • The more strands of wire in a test lead, the more flexible it typically is.
  • Higher strand count increases test lead life.
  • TPI silicone insulated test leads offer higher strand counts than PVC insulated leads.

PVC Insulated test leads

  • Durable low cost lead.
  • Useful for general test and measurement applications.

Silicone Insulated test leads

  • Most durable test lead.
  • Double insulated for safety. When half the insulation is worn away or when a lead is nicked or cut, you will see a white strip. This strip indicates half the insulation is gone and the lead should be replaced.
  • Flame retardant. PVC test leads will burn or melt when exposed to heat.
  • More flexible than PVC leads.
  • Typically carry agency approval such as: cULus and IEC category ratings

Lead Types

Screw-on tip test leads

  • Limited versatility. Accept push on alligator clips only.
  • Made of PVC insulation

Screw-on tip test leads

  • More versatility. Allows attachment of screw on accessories like alligator clips and adapters. More secure attachment than straight tipped test leads
  • Screw on tip test leads can be converted to modular test leads using the A052 modular adapters.
  • Made of PVC or Silicone insulation depending on lead.

Modular test leads

  • Most versatility. Allows selection of different ends or tips for varying applications. One modular lead can be used as a grabber, back probe, standard lead, etc.
  • Lead ends and tips are easily interchanged.

Fused test leads

  • Increased safety over standard non-fused test leads. Fuses in a tester protect the tester; fused test leads protect the user.
  • Used for additional safety when making voltage measurements.
Back To Top