Compact easy to use thermometer with large display and auto power off.
Auto field calibrate to ±2˚F in less than 10 seconds using ice water.
- 306C includes the A306 protective boot
- Easy-to-read LCD
- Field calibrate to +/- 2°F
- Data hold
- Penetration tip
- Auto off
- Temperature range -58°F to 300°F
306C Operating Instructions
To use the 306 remove the protective sheath, press the ON/DH (Data Hold) button and insert at least 1/2” of the stem into the testing area. Push the ON/DH button a second time and the temperature reading will automatically be held on the LCD display. “°F” (°C) will blink when DH is in operation. Pressing the ON/DH button a third time will return the 306 to normal operation. To save battery life, the 306 will automatically turn off after approximately 35 minutes.
Note: When turning the 306 on, the LCD will display the last reading before turning off for 2 seconds. Then it will display the current temperature.
Product Documentation
Click below to view or download product documentation PDFs:
Get more accurate readings by using the right tip for your thermometer:
- Penetration: Use for immersion and air; air response time will be slower than if using anactual air probe.
- Chisel: Need chisel tip for surface temperatures. Penetration and/or air tips will not givean accurate surface reading.
- Air: Samples air temperatures three times faster than penetration or contact tips.
- Contact: Measures three times faster than chisel tip.
| Model 306C Specifications | ||
|---|---|---|
| Temperature Range | -40°F to 300°F | |
| Accuracy | +/-2°F | |
| Resolution | 0.1°F | |
| Sample Rate | 1 reading every 1.5 second | |
| Stem Length | 4.9" | |
| Tip Type | Penetration | |
| Water Resistant | Yes | |
| Water Proof | N/A | |
| °C / °F Selectable | No | |
| Data Hold | Yes | |
| Auto Off | Yes | |
| Battery Type | LR44 | |
Model 306C Applications
- Ambient air
- Calibrate thermostats
- Vents
- Compressor heads
- Registers
- Grill and surface temperatures
- Serving temperatures
Frequently Asked Questions
How do I check calibration of my pocket thermometer?
Place thermometer in a solution of crushed ice and water, swirl the water around and temperature should read close to 32°F.
Does the whole stem need to be immersed to get an accurate reading?
The sensor is in the tip of the probe and needs to be 1/2 inch into whatever you are measuring.
What battery does my pocket thermometer use?
The LR44 button battery is used in TPI pocket digital thermometers.